No vocabulary
Baton
Cut off
Cut off
A cut-off handle requires a special tool to dectivate the circuit manually.
Paddle
Push-pull
Push-to-reset
Rocker
Rocker (Illuminated)
Square
Toggle
Toggle
- C Frame: P1-4, Toggle (PDF / 720 KB)
- DD Frame: P1, Quick Connect, Toggle (PDF / 47 KB)
- DD Frame: P1, Push-in Bullet, Toggle (PDF / 48 KB)
- DD Frame: P1, Push-in Bullet, Toggle with Auxiliary Switch (PDF / 53 KB)
- DD Frame: P1, Quick Connect, Toggle (PDF / 51 KB)
- DD Frame: P1, Screw, Toggle (PDF / 54 KB)
- DD Frame: P1, Screw, Toggle with Auxiliary Switch (PDF / 67 KB)
- DD Frame: P1, Stud, Toggle with Auxiliary Switch (PDF / 49 KB)
- DD Frame: P2, Push-in Bullet, Toggle with Auxiliary Switch (PDF / 63 KB)
- DD Frame: P2, Push-in Bullet, Toggle (PDF / 59 KB)
- DD Frame P2, Quick Connect, Toggle with Auxiliary Switch (PDF / 60 KB)
- DD Frame: P2, Quick Connect, Toggle (PDF / 55 KB)
- DD Frame: P2, Screw, Toggle with Auxiliary Switch (PDF / 57 KB)
- DD Frame P2, Screw, Toggle (PDF / 53 KB)
- DD Frame: P2, Stud, Toggle with Auxiliary Switch (PDF / 57 KB)
- DD Frame: P2, Stud, Toggle (PDF / 53 KB)
CE/CCC
CE/CCC
CE: European Union
CCC: China Compulsory Certification
CSA/cULus/cRUus
No approvals
UL1077 recognised
UL1077 recognised
UL 1077 Supplementary Protectors
UL 1077 defines supplementary protectors as devices intended for use as overcurrent, over-voltage or under-voltage protection within an appliance or other electrical equipment where branch-circuit overvoltage protection is already provided or is not required.
Important Note: While the term circuit breaker is used to describe both UL 489 and UL 1077 devices, UL 1077 devices are not considered Circuit Breakers by UL. They are defined as Supplementary Protectors.
UL1500
UL489 listed
UL489 listed
UL 489 circuit breakers are “intended for installation in a circuit breaker enclosure or as parts of other devices, such as service entrance equipment and panelboards.” They are regularly required on panel designs, per the National Electrical Code.